• 1
  • 2
  • 3
  • 4

Manufacturers Of :-


Other Products :-

  • Industrial Battery Chargers
  • Customized DC Power Supplies
  • C.V.T.

Line Interactive UPS

Line Interactive UPS

SPECIFICATIONS FOR LINE INTERACTIVE UPS

INPUT  
Voltage : 230VAC, 1Ph.-25% to + 20%
Frequency : 50Hz +/- 5%
OUTPUT  
Voltage : SYSTEM ON MAINS
  230 VAC +/- 6% SINE WAVE
  SYSTEM ON BACKUP:  230 VAC, 1 Ph. +/- 2% Quasi Square
Frequency : SYSTEM ON MAINS:      50 Hz +/-5%
  SYSTEM ON BACKUP:   50 Hz +/-1%
Power : 250 VA to 2KVA
Power Factor : 0.8 Lag to Unity
BATTERY : With Built in Maintenance free and external (for higher backup)
Battery Voltage : 12VDC to 48VDC
Backup time : 20 Min. (Typical)
(Higher Backup time available optionally)
Change Over : 4-7 ms (Typical)
Recharge time : 8hrs. (90% after fully discharge)
ALARM : * Single beep at Mains Fail
* Repeated beeps at 10 sec. interval at Battery discharge
* Level from 60% to 90%
* Fast Beeps at Final Shut Down
PROTECTION  
Mains Over Voltage : Change over to battery at 230V to + 20%
Mains under Voltage : Change over to battery at 230V - 25%
Mains Fail : Change over to battery
Battery Low : Inverter shut down after full discharge of Battery.
Output Short Circuit Inverter shut down at short circuit at its output
   
INDICATIONS : MAINS ON (system on Mains)
  * INVERTER ON (system on backup)
  * FAULT (inverter fail)
CONTROLS : * Power ON/OFF switch
  * RESET
ENVIRONMENTAL
CONDITIONS :
* 0-550 C Operating Temperature
* 0 to 95 % Humidity (Non Condensing)
* Natural Air Cooled
 

SALIENT FEATURES

* Completely modular MOSFET Based Design. * Easy to use single rocker switch for control
* Automatic shut - down when battery is drained. * Auto - restart on return of mains power.
* Ultra High speed automatic battery recharging. * Virtually silent during normal use.
* Extremely compact to fit any space available. * Built-in A.V.R. For Mains Stabilizations
* Continuous power sensing, high/low voltage protection. * Innovative audio alarm systems